What I Don’t Reclaim | Popular Woodworking Magazine

What I Don’t Reclaim | Popular Woodworking Magazine

I believe that there is value and potential in almost all types of solid reclaimed wood. Whether it is solid wood furniture parts, post and beams from a demolished factory, or dismantled boards from a pallet or a shipping crate – it is all worthy of saving. Solid wood reclaims, even after years of being left out in the sun, rained on, and covered with snow, is still a viable material to work with. It might become warped, checked, and most likely show the hallmarks of weathering, but with some time (to let it dry) and little effort with the sander, jointer and planer, one can harvest enough core wood from it for a variety of projects.

However this is not the case with most industrial wood materials such as MDF and particle boards. This man-made material does not behave like natural wood. Unlike solid wood which can absorb water, swell, and then release the water back to the environment and contract, an MDF or particle board will swell, but will not shrink back after the water has evaporated. With every cycle of wetness and dryness these compressed wood-fibers and glue boards will continue to deform and eventually disintegrate. Plywood is a bit more resilient to water than MDF, but it too will “leaven” after some time. Only Marine Plywood, which is made from special piles of wood and water-resistant wood, will not deform in the presence of water.

In this picture you can see the evidence of water damage to a stool built from painted MDF parts.

I often say to myself, If you can’t reclaim the “wood” at least save the hardware.

The maker of this odd cladded wall built under a store’s front window used particle boards covered with veneer — obviously the wrong choice for an outdoor material. Luckily, he or she ran out of particle boards and used one board of real wood just as the job was ready to be completed. Check the pictures below to see how the real wood board was hardly affected by the elements while its neighboring boards are almost completely disintegrated.

Particle boards covered with veneer is a bad material choice for exterior walls or for cabinetry in moist or wet environments such as the bathroom.

The board on the left is solid wood, while the one on the right is particle board. 

Working Reclaimed Wood guides you through the entire process of finding, using and finishing reclaimed wood with case studies, projects and makers’ stories. From knowing different types of wood you’ll encounter to finding good sources for material and gaining the inspiration you need to create, it’s all here!

Leave a Reply

Close Menu