Repair an Upholstered Chair the Quick and Dirty Way

Repair an Upholstered Chair the Quick and Dirty Way


Professional upholsterer Mike Mascelli, who contributes to Popular Woodworking and also teaches at Marc Adams School of Woodworking in Indianapolis, would be horrified if he saw how I repaired two upholstered chairs over the holidays at my daughter-in-laws.

She had bought the chairs used over a decade ago because they fit perfectly in the small nook in her kitchen. The chairs are used constantly and the seats are beginning to sag quite noticeably. She has looked for replacement chairs but hasn’t found any that fit as perfectly as these. Reupholstering is, of course, the best solution, but it will cost more than she wants to spend.

The springs had broken lose and were popping out.

So while I was there we turned the chairs upside down to size up the problem. Several of the springs had come untied (the tying didn’t appear to my unprofessional eye to have been done that well in the first place) and so they weren’t providing the support needed.

Here’s the plywood panel screwed on underneath.

Wanting to please my daughter-in-law, I proposed a very unprofessional repair of screwing a plywood panel to the underside of the chairs to push the springs back up to their supporting positions.

I used screws instead of nails because people tended to “plop” into the chairs and screws would resist coming out much better than nails.

This repair worked surprisingly well, no doubt helped by the thick cushion, and it came with the bonus of my getting to work together with my grandson. He loves working with tools. (If you’d like to see my grandson helping at a much younger age, and you have a copy of my book “Flexner on Finishing,” open it to page 40.)

My grandson loves to help.



Leave a Reply

Close Menu